国产成人精品999在线观看,久久精品无码一区二区三区色欲,九色综合狠狠综合久久

產品型號LM4128BQ1MF2.0/NOPB的Datasheet PDF文件預覽

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

LM4128/LM4128Q SOT-23 Precision Micropower Series Voltage Reference

Check for Samples: LM4128, LM4128Q

FEATURES

DESCRIPTION

Ideal for space critical applications, the LM4128

precision voltage reference is available in the SOT-23

surface-mount package. The LM4128’s advanced

design eliminates the need for an external stabilizing

capacitor while ensuring stability with capacitive loads

up to 10 μF, thus making the LM4128 easy to use.

Output Voltage Initial Accuracy 0.1%

Low Temperature Coefficient 75 ppm/°C

Low Supply Current, 60 μA

Enable Pin Allowing a 3 μA Shutdown Mode

Up to 20 mA Output Current

Series references provide lower power consumption

than shunt references, since they do not have to idle

the maximum possible load current under no load

conditions. This advantage, the low quiescent current

(60 μA), and the low dropout voltage (400 mV) make

the LM4128 ideal for battery-powered solutions.

Voltage Options 1.8V, 2.048V, 2.5V, 3.0V, 3.3V,

4.096V

Custom Voltage Options Available (1.8V to

4.096V)

V_INRange of V_REF+ 400 mV to 5.5V @10 mA

Stable with Low ESR Ceramic Capacitors

5-Pin SOT-23 Package

The LM4128 is available in four grades (A, B, C, and

D) for greater flexibility. The best grade devices (A)

have an initial accuracy of 0.1% with ensured

temperature coefficient of 75 ppm/°C or less, while

the lowest grade parts (D) have an initial accuracy of

1.0% and a tempco of 100 ppm/°C.

?40°C to 125°C Junction Temperature Range

LM4128AQ/BQ/CQ/DQ are AEC-Q100 Grade 1

Qualified and are Manufactured on an

Automotive Grade Flow

Typical Application Circuit

APPLICATIONS

VREF

Input

VIN

Output

Instrumentation & Process Control

Test Equipment

OUT

LM4128

Data Acquisition Systems

Base Stations

Servo Systems

Enable

GND

Portable, Battery Powered Equipment

Automotive & Industrial Electronics

Precision Regulators

Battery Chargers

*Note: The capacitor C_INis required and

the capacitor C_OUTis optional.

Communications

Medical Equipment

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Connection Diagram

VREF

VIN

N/C

GND

5-Pin SOT-23 Package – Top View

See Package Number DBV (R-PDSO-G5)

PIN DESCRIPTIONS

Pin #

Name

Function

N/C

GND

No connect pin, leave floating

Ground

Enable pin

VIN

Input supply

VREF

Reference output

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Absolute Maximum Ratings⁽¹⁾

Maximum Voltage on any input

Output short circuit duration

Power Dissipation (T_A= 25°C)⁽²⁾

Storage Temperature Range

-0.3 to 6V

Indefinite

350 mW

?65°C to 150°C

260°C

(soldering, 10sec)

Vapor Phase (60 sec)

Infrared (15sec)

Lead Temperature

215°C

220°C

ESD Susceptibility⁽³⁾

Human Body Model

2 kV

(1) Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. Operating Ratings indicate conditions for

which the device is intended to be functional, but do not ensure specific performance limits. For ensured specifications, see Electrical

Characteristics.

(2) Without PCB copper enhancements. The maximum power dissipation must be de-rated at elevated temperatures and is limited by T_JMAX

(maximum junction temperature), θ_J-A(junction to ambient thermal resistance) and T_A(ambient temperature). The maximum power

dissipation at any temperature is: P_DissMAX= (T_JMAX- T_A) /θ_J-Aup to the value listed in the Absolute Maximum Ratings. θ_J-Afor SOT-23

package is 220°C/W, T_JMAX= 125°C.

(3) The human body model is a 100 pF capacitor discharged through a 1.5 k? resistor into each pin.

Operating Ratings

Maximum Input Supply Voltage

Maximum Enable Input Voltage

Maximum Load Current

5.5V

V_IN

20mA

Junction Temperature Range (T_J)

?40°C to +125°C

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

Electrical Characteristics

LM4128-1.8 (V_OUT= 1.8V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-1.8

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-1.8

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-1.8

LM4128C-1.8

LM4128D-1.8

TCV_REF/ °C⁽³⁾

LM4128B-1.8

Temperature Coefficient

ppm / °C

LM4128C-1.8

100

LM4128D-1.8

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

200

170

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Electrical Characteristics

LM4128-2.0 (V_OUT= 2.048V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-2.0

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-2.0

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-2.0

LM4128C-2.0

LM4128D-2.0

TCV_REF/ °C⁽³⁾

LM4128B-2.0

Temperature Coefficient

ppm / °C

LM4128C-2.0

100

LM4128D-2.0

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

175

190

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

Electrical Characteristics

LM4128-2.5 (V_OUT= 2.5V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-2.5

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-2.5

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-2.5

LM4128C-2.5

LM4128D-2.5

TCV_REF/ °C⁽³⁾

LM4128B-2.5

Temperature Coefficient

ppm / °C

LM4128C-2.5

100

LM4128D-2.5

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

175

275

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Electrical Characteristics

LM4128-3.0 (V_OUT= 3.0V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-3.0

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-3.0

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-3.0

LM4128C-3.0

LM4128D-3.0

TCV_REF/ °C⁽³⁾

LM4128B-3.0

Temperature Coefficient

ppm / °C

LM4128C-3.0

100

LM4128D-3.0

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

175

285

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

Electrical Characteristics

LM4128-3.3 (V_OUT= 3.3V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-3.3

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-3.3

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-3.3

LM4128C-3.3

LM4128D-3.3

TCV_REF/ °C⁽³⁾

LM4128B-3.3

Temperature Coefficient

ppm / °C

LM4128C-3.3

100

LM4128D-3.3

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

175

310

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Electrical Characteristics

LM4128-4.1 (V_OUT= 4.096V)

Limits in standard type are for T_J= 25°C only, and limits in boldface type apply over the junction temperature (T_J) range of -

40°C to +125°C unless otherwise specified. Minimum and Maximum limits are ensured through test, design, or statistical

correlation. Typical values represent the most likely parametric norm at T_J= 25°C, and are provided for reference purposes

only. Unless otherwise specified V_IN= 5V and I_LOAD= 0A.

Symbol

Parameter

Output Voltage Initial Accuracy

LM4128A-4.1

Conditions

Min⁽¹⁾

Typ⁽²⁾

Max⁽¹⁾

Unit

V_REF

(A Grade - 0.1%)

-0.1

-0.2

-0.5

-1.0

+0.1

+0.2

+0.5

+1.0

LM4128B-4.1

(B Grade - 0.2%)

(C Grade - 0.5%)

(D Grade - 1.0%)

LM4128A-4.1

LM4128C-4.1

LM4128D-4.1

TCV_REF/ °C⁽³⁾

LM4128B-4.1

Temperature Coefficient

ppm / °C

LM4128C-4.1

100

LM4128D-4.1

I_Q

Supply Current

μA

I_{Q_SD}

Supply Current in Shutdown

Line Regulation

EN = 0V

ΔV_REF/ΔV_IN

ΔV_REF/ΔI_LOAD

ΔV_REF

V_REF+ 400 mV ≤ V_IN≤ 5.5V

0 mA ≤ I_LOAD≤ 20 mA

1000 Hrs

100

ppm / V

ppm / mA

Load Regulation

120

400

Long Term Stability⁽⁴⁾

Thermal Hysteresis⁽⁵⁾

Dropout Voltage⁽⁶⁾

ppm

-40°C ≤ T_J≤ +125°C

I_LOAD= 10 mA

V_IN- V_REF

175

350

μV_PP

V_N

I_SC

V_IL

V_IH

Output Noise Voltage

Short Circuit Current

0.1 Hz to 10 Hz

Enable Pin Maximum Low Input Level

Enable Pin Minimum High Input Level

(1) Limits are 100% production tested at 25°C. Limits over the operating temperature range are ensured through correlation using Statistical

Quality Control.

(2) Typical numbers are at 25°C and represent the most likely parametric norm.

(3) Temperature coefficient is measured by the "Box" method; i.e., the maximum ΔV_REFis divided by the maximum ΔT.

(4) Long term stability is V_REF@25°C measured during 1000 hrs.

(5) Thermal hysteresis is defined as the change in +25°C output voltage before and after cycling the device from (-40°C to 125°C).

(6) Dropout voltage is defined as the minimum input to output differential at which the output voltage drops by 0.5% below the value

measured with a 5V input.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

Typical Performance Characteristics for 2.5V

Output Voltage vs Temperature

Load Regulation

2.506

2.505

2.504

2.503

2.502

2.501

2.500

2.499

2.498

2.497

2.496

2.5075

2.505

2.5025

2.5

125°C

25°C

5 Typical Units

2.4975

2.495

2.4925

-40°C

100

1000 10000

100000

-40 -20

20 40 60 80 100 120

TEMPERATURE (^oC)

LOAD CURRENT (mA)

Figure 1.

Figure 2.

Line Regulation

0.1 - 10 Hz Noise

2.502

2.501

2.500

2.499

2.498

2.497

125°C

25°C

-40°C

3.0

3.5

4.0

4.5

5.0

5.5

INPUT VOLTAGE (V)

Figure 3.

Figure 4.

Output Voltage Noise Spectrum

Power Supply Rejection Ratio vs Frequency

4.096V

= 1 mF

OUT

3.0V

2.5V

3.3V

2.0V

No C

OUT

1.8V

100

10k

100k

100

1000

10000

FREQUENCY (Hz)

Figure 5.

Figure 6.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Typical Performance Characteristics for 2.5V (continued)

Dropout vs Load to 0.5% Accuracy

Typical Long Term Stability

600

400

200

150

100

1 TYPICAL UNIT FROM EACH

VOLTAGE OPTION

-50

-100

-150

-200

200

400

600

800

1000

LOAD CURRENT (mA)

TIME (Hours)

Figure 7.

Figure 8.

Supply Current vs Input Voltage

Shutdown I_Qvs Input Voltage

100

5.0

4.5

4.0

3.5

3.0

2.5

2.0

125°C

25°C

-40°C

2.5 3.0 3.5 4.0 4.5 5.0

INPUT VOLTAGE (V)

Figure 10.

2.0

5.5

INPUT VOLTAGE (V)

Figure 9.

Ground Current vs Load Current

Line Transient Response V_IN= 3V to 5V

100

125^oC

25^oC

-40^oC

LOAD CURRENT (mA)

Figure 11.

Figure 12.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

Typical Performance Characteristics for 2.5V (continued)

Load Transient Response I_LOAD= 0 to 10mA

Short-Circuit Protection and Recovery

Figure 13.

Figure 14.

Start-Up Response

Figure 15.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

APPLICATION INFORMATION

THEORY OF OPERATION

The foundation of any voltage reference is the band-gap circuit. While the reference in the LM4128 is developed

from the gate-source voltage of transistors in the IC, principles of the band-gap circuit are easily understood

using a bipolar example. For a detailed analysis of the bipolar band-gap circuit, see the AN-56 Application Report

(SNVA514).

SUPPLY AND ENABLE VOLTAGES

To ensure proper operation, V_ENand V_INmust be within a specified range. An acceptable range of input voltages

V_IN> V_REF+ 400 mV (I_LOAD≤ 10 mA)

(1)

The enable pin uses an internal pull-up current source (I_{PULL_UP}? 2 μA) that may be left floating or triggered by

an external source. If the part is not enabled by an external source, it may be connected to V_IN. An acceptable

range of enable voltages is given by the enable transfer characteristics. See the Electrical Characteristics section

and Enable Transfer Characteristics figure for more detail. Note, the part will not operate correctly for V_EN> V_IN.

COMPONENT SELECTION

A small ceramic (X5R or X7R) capacitor on the input must be used to ensure stable operation. The value of C_IN

must be sized according to the output capacitor value. The value of C_INmust satisfy the relationship C_IN≥ C_OUT

When no output capacitor is used, C_INmust have a minimum value of 0.1 μF. Noise on the power-supply input

may affect the output noise. Larger input capacitor values (typically 4.7 μF to 22 μF) may help reduce noise on

the output and significantly reduce overshoot during startup. Use of an additional optional bypass capacitor

between the input and ground may help further reduce noise on the output. With an input capacitor, the LM4128

will drive any combination of resistance and capacitance up to V_REF/20 mA and 10 μF respectively.

The LM4128 is designed to operate with or without an output capacitor and is stable with capacitive loads up to

10 μF. Connecting a capacitor between the output and ground will significantly improve the load transient

response when switching from a light load to a heavy load. The output capacitor should not be made arbitrarily

large because it will effect the turn-on time as well as line and load transients.

While a variety of capacitor chemistry types may be used, it is typically advisable to use low esr ceramic

capacitors. Such capacitors provide a low impedance to high frequency signals, effectively bypassing them to

ground. Bypass capacitors should be mounted close to the part. Mounting bypass capacitors close to the part will

help reduce the parasitic trace components thereby improving performance.

SHORT CIRCUITED OUTPUT

The LM4128 features indefinite short circuit protection. This protection limits the output current to 75 mA when

the output is shorted to ground.

TURN ON TIME

Turn on time is defined as the time taken for the output voltage to rise to 90% of the preset value. The turn on

time depends on the load. The turn on time is typically 33.2 μs when driving a 1μF load and 78.8 μs when driving

a 10 μF load. Some users may experience an extended turn on time (up to 10 ms) under brown out conditions

and low temperatures (-40°C).

THERMAL HYSTERESIS

Thermal hysteresis is defined as the change in output voltage at 25oC after some deviation from 25oC. This is to

say that thermal hysteresis is the difference in output voltage between two points in a given temperature profile.

An illustrative temperature profile is shown in Figure 16.

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

125°C

25°C

REF1

Time

REF2

-40°C

Figure 16. Illustrative Temperature Profile

This may be expressed analytically as the following:

lV_REF1- V_REF2

x 10³mV

V_HYS

V_REF

where

V_HYS= Thermal hysteresis expressed in ppm

V_REF= Nominal preset output voltage

V_REF1= V_REFbefore temperature fluctuation

V_REF2= V_REFafter temperature fluctuation

(2)

The LM4128 features a low thermal hysteresis of 190 μV from -40°C to 125°C.

TEMPERATURE COEFFICIENT

Temperature drift is defined as the maximum deviation in output voltage over the operating temperature range.

This deviation over temperature may be illustrated as shown in Figure 17.

Voltage

REF_MAX

Temperature

REF_MIN

Temperature Range

Figure 17. Illustrative Temperature Coefficient Profile

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

Temperature coefficient may be expressed analytically as the following:

(V_{REF_MAX}- V_{REF_MIN}

)

x 10⁶ppm

T_D=

V_REFx DT

where

T_D= Temperature drift

V_REF= Nominal preset output voltage

V_{REF_MIN}= Minimum output voltage over operating temperature range

V_{REF_MAX}= Maximum output voltage over operating temperature range

ΔT = Operating temperature range

(3)

The LM4128 features a low temperature drift of 75 ppm (max) to 100 ppm (max), depending on the grade, from -

40°C to 125°C.

LONG TERM STABILITY

Long-term stability refers to the fluctuation in output voltage over a long period of time (1000 hours). The LM4128

features a typical long-term stability of 50 ppm over 1000 hours. The measurements are made using 5 units of

each voltage option, at a nominal input voltage (5V), with no load, at room temperature.

EXPRESSION OF ELECTRICAL CHARACTERISTICS

Electrical characteristics are typically expressed in mV, ppm, or a percentage of the nominal value. Depending

on the application, one expression may be more useful than the other. To convert one quantity to the other one

may apply the following:

ppm to mV error in output voltage:

V_REFx ppm_ERROR

= V_ERROR

10³

where

V_REFis in volts (V) and V_ERRORis in milli-volts (mV)

(4)

Bit error (1 bit) to voltage error (mV):

V_REF

2ⁿ

x 10³

= V_ERROR

where

V_REFis in volts (V)

V_ERRORis in milli-volts (mV)

and n is the number of bits

(5)

mV to ppm error in output voltage:

V_ERROR

x 10³

= ppm_ERROR

V_REF

where

V_REFis in volts (V)

V_ERRORis in milli-volts (mV)

(6)

Voltage error (mV) to percentage error (percent):

V_ERROR

x 0.1

= Percent_Error

V_REF

where

V_REFis in volts (V)

V_ERRORis in milli-volts (mV)

(7)

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

www.ti.com

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

PRINTED CIRCUIT BOARD and LAYOUT CONSIDERATIONS

References in SOT packages are generally less prone to PC board mounting than devices in Small Outline

(SOIC) packages. To minimize the mechanical stress due to PC board mounting that can cause the output

voltage to shift from its initial value, mount the reference on a low flex area of the PC board, such as near the

edge or a corner.

The part may be isolated mechanically by cutting a U shape slot on the PCB for mounting the device. This

approach also provides some thermal isolation from the rest of the circuit.

Bypass capacitors must be mounted close to the part. Mounting bypass capacitors close to the part will reduce

the parasitic trace components thereby improving performance.

Typical Application Circuits

REF

Input

REF

+5V

-5V

OUT

-V

REF

LM4128

R/2

Enable

GND

4.7 μF< C

< 10 μF

OUT

Figure 18. Voltage Reference with Complimentary Output

+5V

Input

REF

REF_FORCE

100 kW

μF

0.1

REF_SENSE

LM4128

Enable

GND

Figure 19. Precision Voltage Reference with Force and Sense Output

Input

Output

REF

500 W

LM4128

0.1μF

Enable

SET

GND

OUT

= (V

REF

/(R + R

)) + I

SET GND

OUT

GND

1 kW

Figure 20. Programmable Current Source

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

LM4128, LM4128Q

SNVS475E –NOVEMBER 2006–REVISED APRIL 2013

www.ti.com

REVISION HISTORY

Changes from Revision D (April 2013) to Revision E

Page

Changed layout of National Data Sheet to TI format .......................................................................................................... 15

Submit Documentation Feedback

Product Folder Links: LM4128 LM4128Q

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

PACKAGING INFORMATION

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128AMF-1.8/NOPB

LM4128AMF-2.0/NOPB

LM4128AMF-2.5/NOPB

LM4128AMF-3.0/NOPB

LM4128AMF-3.3/NOPB

LM4128AMF-4.1/NOPB

LM4128AMFX-1.8/NOPB

LM4128AMFX-2.0/NOPB

LM4128AMFX-2.5/NOPB

LM4128AMFX-3.0/NOPB

LM4128AMFX-3.3/NOPB

LM4128AMFX-4.1/NOPB

LM4128AQ1MF1.8/NOPB

LM4128AQ1MF2.0/NOPB

LM4128AQ1MF2.5/NOPB

LM4128AQ1MF3.0/NOPB

LM4128AQ1MF3.3/NOPB

ACTIVE

SOT-23

DBV

1000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R5AA

R5BA

R5CA

R5DA

R5EA

R5FA

R5AA

R5BA

R5CA

R5DA

R5EA

R5FA

R6AA

R6BA

R6CA

R6DA

R6EA

ACTIVE

DBV

1000

3000

1000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

-40 to 125

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Addendum-Page 1

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128AQ1MF4.1/NOPB

LM4128AQ1MFX1.8/NOPB

LM4128AQ1MFX2.0/NOPB

LM4128AQ1MFX2.5/NOPB

LM4128AQ1MFX3.0/NOPB

LM4128AQ1MFX3.3/NOPB

LM4128AQ1MFX4.1/NOPB

LM4128BMF-1.8/NOPB

ACTIVE

SOT-23

DBV

1000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R6FA

R6AA

R6BA

R6CA

R6DA

R6EA

R6FA

R5AB

R5BB

ACTIVE

DBV

3000

1000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

LM4128BMF-2.0/NOPB

Green (RoHS

& no Sb/Br)

LM4128BMF-2.5

NRND

SOT-23

DBV

1000

TBD

Call TI

CU SN

Call TI

-40 to 125

R5CB

LM4128BMF-2.5/NOPB

ACTIVE

Green (RoHS

& no Sb/Br)

Level-1-260C-UNLIM

LM4128BMF-3.0/NOPB

LM4128BMF-3.3/NOPB

LM4128BMF-4.1/NOPB

LM4128BMFX-1.8/NOPB

LM4128BMFX-2.0/NOPB

LM4128BMFX-2.5/NOPB

LM4128BMFX-3.0/NOPB

ACTIVE

SOT-23

DBV

1000

3000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

-40 to 125

R5DB

R5EB

R5FB

R5AB

R5BB

R5CB

R5DB

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128BMFX-3.3/NOPB

LM4128BMFX-4.1/NOPB

LM4128BQ1MF1.8/NOPB

LM4128BQ1MF2.0/NOPB

LM4128BQ1MF2.5/NOPB

LM4128BQ1MF3.0/NOPB

LM4128BQ1MF3.3/NOPB

LM4128BQ1MF4.1/NOPB

LM4128BQ1MFX1.8/NOPB

LM4128BQ1MFX2.0/NOPB

LM4128BQ1MFX2.5/NOPB

LM4128BQ1MFX3.0/NOPB

LM4128BQ1MFX3.3/NOPB

LM4128BQ1MFX4.1/NOPB

LM4128CMF-1.8/NOPB

LM4128CMF-2.0/NOPB

LM4128CMF-2.5/NOPB

LM4128CMF-3.0/NOPB

ACTIVE

SOT-23

DBV

3000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R5EB

R5FB

R6AB

R6BB

R6CB

R6DB

R6EB

R6FB

R6AB

R6BB

R6CB

R6DB

R6EB

R6FB

R5AC

R5BC

R5CC

R5DC

ACTIVE

DBV

3000

1000

3000

1000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128CMF-3.3/NOPB

LM4128CMF-4.1/NOPB

LM4128CMFX-1.8/NOPB

LM4128CMFX-2.0/NOPB

LM4128CMFX-2.5/NOPB

LM4128CMFX-3.0/NOPB

LM4128CMFX-3.3/NOPB

LM4128CMFX-4.1/NOPB

LM4128CQ1MF1.8/NOPB

LM4128CQ1MF2.0/NOPB

LM4128CQ1MF2.5/NOPB

LM4128CQ1MF3.0/NOPB

LM4128CQ1MF3.3/NOPB

LM4128CQ1MF4.1/NOPB

LM4128CQ1MFX1.8/NOPB

LM4128CQ1MFX2.0/NOPB

LM4128CQ1MFX2.5/NOPB

LM4128CQ1MFX3.0/NOPB

ACTIVE

SOT-23

DBV

1000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R5EC

R5FC

R5AC

R5BC

R5CC

R5DC

R5EC

R5FC

R6AC

R6BC

R6CC

R6DC

R6EC

R6FC

R6AC

R6BC

R6CC

R6DC

ACTIVE

DBV

1000

3000

1000

3000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Addendum-Page 4

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128CQ1MFX3.3/NOPB

LM4128CQ1MFX4.1/NOPB

LM4128DMF-1.8/NOPB

LM4128DMF-2.0/NOPB

LM4128DMF-2.5/NOPB

LM4128DMF-3.0/NOPB

LM4128DMF-3.3/NOPB

LM4128DMF-4.1/NOPB

LM4128DMFX-1.8/NOPB

LM4128DMFX-2.0/NOPB

LM4128DMFX-2.5/NOPB

LM4128DMFX-3.0/NOPB

LM4128DMFX-3.3/NOPB

LM4128DMFX-4.1/NOPB

LM4128DQ1MF1.8/NOPB

LM4128DQ1MF2.0/NOPB

LM4128DQ1MF2.5/NOPB

LM4128DQ1MF3.0/NOPB

ACTIVE

SOT-23

DBV

3000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R6EC

R6FC

R5AD

R5BD

R5CD

R5DD

R5ED

R5FD

R5AD

R5BD

R5CD

R5DD

R5ED

R5FD

R6AD

R6BD

R6CD

R6DD

ACTIVE

DBV

3000

1000

3000

1000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Addendum-Page 5

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

Orderable Device

Status Package Type Package Pins Package

Eco Plan

Lead/Ball Finish

MSL Peak Temp

Op Temp (°C)

-40 to 125

Device Marking

Samples

Drawing

Qty

(1)

(2)

(6)

(3)

(4/5)

LM4128DQ1MF3.3/NOPB

LM4128DQ1MF4.1/NOPB

LM4128DQ1MFX1.8/NOPB

LM4128DQ1MFX2.0/NOPB

LM4128DQ1MFX2.5/NOPB

LM4128DQ1MFX3.0/NOPB

LM4128DQ1MFX3.3/NOPB

LM4128DQ1MFX4.1/NOPB

ACTIVE

SOT-23

DBV

1000

Green (RoHS

& no Sb/Br)

CU SN

Level-1-260C-UNLIM

R6ED

R6FD

R6AD

R6BD

R6CD

R6DD

R6ED

R6FD

ACTIVE

DBV

1000

3000

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

Green (RoHS

& no Sb/Br)

⁽¹⁾The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

⁽²⁾Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

⁽³⁾MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

⁽⁴⁾There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

Addendum-Page 6

PACKAGE OPTION ADDENDUM

www.ti.com

1-Nov-2013

⁽⁵⁾Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

⁽⁶⁾Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish

value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM4128, LM4128-Q1 :

Catalog: LM4128

Automotive: LM4128-Q1

NOTE: Qualified Version Definitions:

Catalog - TI's standard catalog product

Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

Addendum-Page 7

PACKAGE MATERIALS INFORMATION

www.ti.com

23-Sep-2013

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4128AMF-1.8/NOPB SOT-23

LM4128AMF-2.0/NOPB SOT-23

LM4128AMF-2.5/NOPB SOT-23

LM4128AMF-3.0/NOPB SOT-23

LM4128AMF-3.3/NOPB SOT-23

LM4128AMF-4.1/NOPB SOT-23

LM4128AMFX-1.8/NOPB SOT-23

LM4128AMFX-2.0/NOPB SOT-23

LM4128AMFX-2.5/NOPB SOT-23

LM4128AMFX-3.0/NOPB SOT-23

LM4128AMFX-3.3/NOPB SOT-23

LM4128AMFX-4.1/NOPB SOT-23

LM4128AQ1MF1.8/NOPB SOT-23

LM4128AQ1MF2.0/NOPB SOT-23

LM4128AQ1MF2.5/NOPB SOT-23

LM4128AQ1MF3.0/NOPB SOT-23

LM4128AQ1MF3.3/NOPB SOT-23

LM4128AQ1MF4.1/NOPB SOT-23

DBV

1000

3000

1000

178.0

8.4

3.2

1.4

4.0

8.0

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION

www.ti.com

23-Sep-2013

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4128AQ1MFX1.8/NOP SOT-23

DBV

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128AQ1MFX2.0/NOP SOT-23

LM4128AQ1MFX2.5/NOP SOT-23

LM4128AQ1MFX3.0/NOP SOT-23

LM4128AQ1MFX3.3/NOP SOT-23

LM4128AQ1MFX4.1/NOP SOT-23

LM4128BMF-1.8/NOPB SOT-23

LM4128BMF-2.0/NOPB SOT-23

DBV

1000

3000

1000

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128BMF-2.5

SOT-23

LM4128BMF-2.5/NOPB SOT-23

LM4128BMF-3.0/NOPB SOT-23

LM4128BMF-3.3/NOPB SOT-23

LM4128BMF-4.1/NOPB SOT-23

LM4128BMFX-1.8/NOPB SOT-23

LM4128BMFX-2.0/NOPB SOT-23

LM4128BMFX-2.5/NOPB SOT-23

LM4128BMFX-3.0/NOPB SOT-23

LM4128BMFX-3.3/NOPB SOT-23

LM4128BMFX-4.1/NOPB SOT-23

LM4128BQ1MF1.8/NOPB SOT-23

LM4128BQ1MF2.0/NOPB SOT-23

LM4128BQ1MF2.5/NOPB SOT-23

LM4128BQ1MF3.0/NOPB SOT-23

LM4128BQ1MF3.3/NOPB SOT-23

LM4128BQ1MF4.1/NOPB SOT-23

LM4128BQ1MFX1.8/NOP SOT-23

LM4128BQ1MFX2.0/NOP SOT-23

DBV

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128BQ1MFX2.5/NOP SOT-23

LM4128BQ1MFX3.0/NOP SOT-23

LM4128BQ1MFX3.3/NOP SOT-23

LM4128BQ1MFX4.1/NOP SOT-23

LM4128CMF-1.8/NOPB SOT-23

LM4128CMF-2.0/NOPB SOT-23

LM4128CMF-2.5/NOPB SOT-23

DBV

1000

178.0

8.4

3.2

1.4

4.0

8.0

Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION

www.ti.com

23-Sep-2013

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4128CMF-3.0/NOPB SOT-23

LM4128CMF-3.3/NOPB SOT-23

LM4128CMF-4.1/NOPB SOT-23

LM4128CMFX-1.8/NOPB SOT-23

LM4128CMFX-2.0/NOPB SOT-23

LM4128CMFX-2.5/NOPB SOT-23

LM4128CMFX-3.0/NOPB SOT-23

LM4128CMFX-3.3/NOPB SOT-23

LM4128CMFX-4.1/NOPB SOT-23

LM4128CQ1MF1.8/NOPB SOT-23

LM4128CQ1MF2.0/NOPB SOT-23

LM4128CQ1MF2.5/NOPB SOT-23

LM4128CQ1MF3.0/NOPB SOT-23

LM4128CQ1MF3.3/NOPB SOT-23

LM4128CQ1MF4.1/NOPB SOT-23

DBV

1000

3000

1000

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128CQ1MFX1.8/NOP SOT-23

LM4128CQ1MFX2.0/NOP SOT-23

DBV

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128CQ1MFX2.5/NOP SOT-23

LM4128CQ1MFX3.0/NOP SOT-23

LM4128CQ1MFX3.3/NOP SOT-23

LM4128CQ1MFX4.1/NOP SOT-23

LM4128DMF-1.8/NOPB SOT-23

LM4128DMF-2.0/NOPB SOT-23

LM4128DMF-2.5/NOPB SOT-23

LM4128DMF-3.0/NOPB SOT-23

LM4128DMF-3.3/NOPB SOT-23

LM4128DMF-4.1/NOPB SOT-23

LM4128DMFX-1.8/NOPB SOT-23

LM4128DMFX-2.0/NOPB SOT-23

LM4128DMFX-2.5/NOPB SOT-23

LM4128DMFX-3.0/NOPB SOT-23

LM4128DMFX-3.3/NOPB SOT-23

LM4128DMFX-4.1/NOPB SOT-23

LM4128DQ1MF1.8/NOPB SOT-23

LM4128DQ1MF2.0/NOPB SOT-23

LM4128DQ1MF2.5/NOPB SOT-23

LM4128DQ1MF3.0/NOPB SOT-23

LM4128DQ1MF3.3/NOPB SOT-23

LM4128DQ1MF4.1/NOPB SOT-23

DBV

1000

3000

1000

178.0

8.4

3.2

1.4

4.0

8.0

Pack Materials-Page 3

PACKAGE MATERIALS INFORMATION

www.ti.com

23-Sep-2013

Device

Package Package Pins

Type Drawing

SPQ

Reel

Pin1

Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant

(mm) W1 (mm)

LM4128DQ1MFX1.8/NOP SOT-23

DBV

3000

178.0

8.4

3.2

1.4

4.0

8.0

LM4128DQ1MFX2.0/NOP SOT-23

LM4128DQ1MFX2.5/NOP SOT-23

LM4128DQ1MFX3.0/NOP SOT-23

LM4128DQ1MFX3.3/NOP SOT-23

LM4128DQ1MFX4.1/NOP SOT-23

*All dimensions are nominal

Device

Package Type Package Drawing Pins

SPQ

Length (mm) Width (mm) Height (mm)

LM4128AMF-1.8/NOPB

LM4128AMF-2.0/NOPB

LM4128AMF-2.5/NOPB

LM4128AMF-3.0/NOPB

LM4128AMF-3.3/NOPB

LM4128AMF-4.1/NOPB

LM4128AMFX-1.8/NOPB

SOT-23

DBV

1000

3000

210.0

185.0

35.0

Pack Materials-Page 4

PACKAGE MATERIALS INFORMATION

www.ti.com

23-Sep-2013

Device

Package Type Package Drawing Pins

SPQ

Length (mm) Width (mm) Height (mm)

LM4128AMFX-2.0/NOPB

LM4128AMFX-2.5/NOPB

LM4128AMFX-3.0/NOPB

LM4128AMFX-3.3/NOPB

LM4128AMFX-4.1/NOPB

LM4128AQ1MF1.8/NOPB

LM4128AQ1MF2.0/NOPB

LM4128AQ1MF2.5/NOPB

LM4128AQ1MF3.0/NOPB

LM4128AQ1MF3.3/NOPB

LM4128AQ1MF4.1/NOPB

LM4128AQ1MFX1.8/NOPB

LM4128AQ1MFX2.0/NOPB

LM4128AQ1MFX2.5/NOPB

LM4128AQ1MFX3.0/NOPB

LM4128AQ1MFX3.3/NOPB

LM4128AQ1MFX4.1/NOPB

LM4128BMF-1.8/NOPB

LM4128BMF-2.0/NOPB

LM4128BMF-2.5

SOT-23

DBV

3000

1000

3000

1000

3000

1000

3000

1000

210.0

185.0

電子百科

產品導航

產品型號LM4128BQ1MF2.0/NOPB的概述

產品型號LM4128BQ1MF2.0/NOPB的Datasheet PDF文件預覽